8.5 Improvement 改進
8.5.1 General 總則
The organizationshall identify and implement any changes necessary to ensure and maintain the continuedsuitability, adequacy and effectiveness of the quality management system aswell as medical device safety and performance through the use of the qualitypolicy, quality objectives, audit results, postmarket surveillance, analysis ofdata, corrective actions, preventive actions and management review.
組織應當通過質量方針、質量目標、審計結果、上市后監測、數據分析、糾正措施、預防措施和管理審核來界定和實施任何必要的變更來保證和維持質量管理體系持續的有效性、適宜性和充分性,同時保證醫療器械的安全性和性能。(新增)
8.5.2 Corrective action 糾正措施
The organizationshall take action to eliminate the cause of nonconformities in order to preventrecurrence. Any necessary corrective actions shall be taken without unduedelay. Corrective actions shall be proportionate to the effects of thenonconformities encountered.
組織應當采取措施消除不合格防止再次發生。應當實施必要的糾正措施不得無故拖延。糾正措施應當與所發生的不合格的影響相適應。
The organizationshall document a procedure to define requirements for:
組織應當建立程序文件,定義如下要求:
a) reviewingnonconformities (including complaints);
審核不合格(包括抱怨(投訴))
b) determiningthe causes of nonconformities;
確定導致不合格的原因;(根本原因)
c) evaluatingthe need for action to ensure that nonconformities do not recur;
評估確保不合格不再發生的措施的需求;
d) planning anddocumenting action needed and implementing such action, including, asappropriate, updating documentation;
策劃和文件化所需的措施并實施這些措施,包括,是當時,文件的更新;
e) verifying that the correctiveaction does not adversely affect the ability to meet applicable regulatoryrequirements or the safety and performance of the medical device;
確保糾正措施不再引入新的不利影響,從而保證符合相應法律法規要求或醫療器械的安全性和性能。(新增)
f) reviewing theeffectiveness of corrective action taken.
審核實施的糾正措施的有效性;
Records of theresults of any investigation and of action taken shall be maintained (see 4.2.5).
任何檢查結果和實施措施結果的相關記錄都應當予以保留。(見4.2.5)
8.5.3 Preventive action 預防措施
The organizationshall determine action to eliminate the causes of potential nonconformities inorder to prevent their occurrence. Preventive actions shall be proportionate tothe effects of the potential problems.
組織應當確定消除潛在不合格的原因防止其發生的措施。預防措施應當與潛在問題的影響相適應。
The organizationshall document a procedure to describe requirements for:
組織應當建立程序文件,定義如下要求:
a) determiningpotential nonconformities and their causes;
確定潛在不合格和他們的根本原因;
b) evaluatingthe need for action to prevent occurrence of nonconformities;
評估預防不合格發生的措施的需求;
c) planning and documenting actionneeded and implementing such action, including, as appropriate, updatingdocumentation;
策劃和文件化所需的措施并實施這些措施,包括,是當時,文件的更新;(新增)
d) verifyingthat the action does not adversely affect the ability to meet applicableregulatory requirements or the safety and performance of the medical device;
確保糾正措施不再引入新的不利影響,從而保證符合相應法律法規要求或醫療器械的安全性和性能。(新增)
e) reviewing theeffectiveness of the preventive action taken, as appropriate.
審核實施措施的有效性,適當時(如適用)。
Records of theresults of any investigations and of action taken shall be maintained (see 4.2.5).
任何檢查結果和實施措施結果的相關記錄都應當予以保留。(見4.2.5)
ISO 26262 是汽車行業應對電子系統安全挑戰的核心工具,它不僅是一套流程規范,更是保障用戶生命安全、推動技術革新的
VIEW MORE?→ISO 26262?是國際標準化組織(ISO)發布的汽車功能安全國際標準,旨在規范汽車電子/電氣系統(E/E系統)在設計
VIEW MORE?→ISO14001認證不僅是企業履行環境責任的工具,更是實現經濟效益與生態效益雙贏的戰略選擇。它通過科學管理降低風險、提升
VIEW MORE?→ISO 9001認證不僅是企業質量管理的工具,更是戰略發展的基石。它通過系統化思維和持續優化,助力企業在復雜市場環境中實
VIEW MORE?→ISO 9001與IATF 16949的本質區別在于行業適配性與深度要求。前者是通用質量管理的“基礎工具”,后者則是汽車
VIEW MORE?→?隨著汽車智能化發展,IATF 16949逐步強化對軟件質量、網絡安全的要求。企業需整合IT與質量管理,例如通過軟件FM
VIEW MORE?→全國統一客戶服務熱線
If you have any question,feel free to contact us深圳總公司地址:深圳市羅湖區黃貝街道深南東路文華大廈21F
四川分公司地址:成都市錦江區錦東路
上海分公司地址:上海市奉賢區肖塘路
江西分公司地址:江西省南昌市南昌高新技術產業開發區昌東鎮日新村商業街5號樓三樓
湖南分公司地址:湖南省長沙市雨花區勞動西路528號現代華都家園綜合樓26樓
西安分公司地址:西安市高新區灃惠南路34號新長安廣場A座25層
武漢分公司地址:湖北省武漢市東湖新技術開發區光谷大道特1號國際企業中心2棟4層05號
網址:www.finyala.com 微信公眾號:16949
客服QQ:395601381 客服電話:400 128 6881
聯系電話:13510000845 鄔小姐 15982596811李小姐 18925449988吳先生 13426595559陳先生 13712230915胡老師 13202268350李老師
Copyright?深圳博凌管理技術有限公司 all rights reserved 備案號:粵ICP備19062690號 技術支持:顧佰特科技
16949認證_IATF16949培訓_ISO9001快速拿證_ISO13485認證輔導_APQP/FMEA培訓_ISO輔導_醫療體系輔導_汽車體系輔導